Take two halves of the main body, apply epoxy or superglue and align two halves as shown above.
Clamp two halves if necessary and wait for glue to set.
Now take the handle and attach it to the main body like shown above using epoxy or hot glue. Leave for glue to set.
Take the boxy little dowel and glue it into the main body like shown above. Then next take the middle of the barrel and attach it to the main body aligning it with the help of a dowel and cutout. Use epoxy or hot glue. Leave for glue to set.
Next take the end of the barrel and glue it to the rest of the assembly like shown above. Use epoxy glue. Leave it to set.
Now take the scope attachment and glue it on top of the gun. Try to alight it to be in the middle and like shown above. Use epoxy or hot glue. Leave for glue to set.
Finally take the scope rings and glue them on top of the scope attachment like shown above. Use epoxy or hot glue. Leave to set.
If you followed all the steps above, you should have a finished Blaster. Please note: we recommend using Epoxy Glue throughout the assembly process as it bonds the parts very well. It is a lot easier to work on sanding and painting the blaster when it is in parts. And assembly is now easy and painless.
Hope you enjoy your new Dastardly Maggie :)